BIS certification is mandatory for floor treatment and wet scrubbing machines in India. The requirement comes from the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 (S.O. 1739(E), dated 6 April 2026). The Order comes into force on 1 October 2026 for large and medium enterprises, 1 January 2027 for small enterprises, and 1 April 2027 for micro enterprises. Floor Treatment and Wet Scrubbing Machines must conform to IS 302 (Part 1):2024, which is harmonised with IEC 60335-1, together with any applicable particular requirements. Each unit must carry the ISI Mark under Scheme-I of the BIS (Conformity Assessment) Regulations, 2018. Products manufactured in India solely for export are exempt. Foreign manufacturers apply through the Foreign Manufacturers Certification Scheme (FMCS). Non-compliance is punishable under the BIS Act, 2016.
Floor treatment machines, such as buffers, polishers and waxers, and wet scrubbing machines, such as floor scrubbers, are used to clean and finish floors in homes, offices, shops, hotels, schools and hospitals. They combine mains or battery power, a rotating brush or pad, and water or cleaning solution on wet floors. Poor construction can cause electric shock, overheating, fire or injury from the rotating parts.
The 2026 Quality Control Order for household and similar electrical appliances makes BIS certification compulsory for this product. Manufacturers need a BIS licence and the ISI Mark. Importers and brand owners must source only from BIS-licensed manufacturers. This guide explains what the Order requires, which standard applies, what testing involves and how to plan your certification.
📑 Quick Navigation
- Is BIS Certification Mandatory for Floor Treatment and Wet Scrubbing Machines?
- Applicable Standard: IS 302 (Part 1):2024
- QCO 2026 Implementation Dates
- Mandatory Tests for Floor Treatment and Wet Scrubbing Machines
- Marking and User Information
- BIS Certification Process — Step by Step
- Indian Manufacturers vs Foreign Manufacturers (FMCS)
- Documents Required
- Timeline and Cost Factors
- Exemptions and Relaxations
- Post-Certification Obligations
- Common Non-Conformities
- Penalty for Selling Without the ISI Mark
- Benefits of BIS Certification
- How Rego Services Supports Your Certification
- Frequently Asked Questions
Is BIS Certification Mandatory for Floor Treatment and Wet Scrubbing Machines?
What Is BIS Certification for Floor Treatment and Wet Scrubbing Machines?
BIS certification is the licence and ISI Mark that the Bureau of Indian Standards grants once a floor treatment or wet scrubbing machine model has been tested and found to conform to IS 302 (Part 1):2024 and the applicable particular requirements. It is how the 2026 Quality Control Order is enforced for this product.
Yes. The Ministry of Commerce and Industry notified the Order on 6 April 2026. It supersedes the 2025 Order and covers 90 appliance categories. Once the Order applies to you, a floor treatment or wet scrubbing machine cannot lawfully be manufactured, imported, distributed or sold unless it conforms to the notified standard and bears the ISI Mark. You can read the Order's scope on the Department for Promotion of Industry and Internal Trade website. Licence and standards information is published by the Bureau of Indian Standards.
| Particulars | Details |
|---|---|
| Regulation | Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 |
| Notification | S.O. 1739(E), dated 6 April 2026 (supersedes the 2025 Order, S.O. 2232(E)) |
| Product Entry | Floor Treatment Machines and Wet Scrubbing Machines (verify the exact Sl. No. against the official notification) |
| Indian Standard | IS 302 (Part 1):2024, harmonised with IEC 60335-1, with particular requirements aligned with IEC 60335-2-10 |
| Certification Route | ISI Mark licence under Scheme-I, Schedule-II, BIS (Conformity Assessment) Regulations, 2018 |
| Enforcement | Bureau of Indian Standards; penalties under the BIS Act, 2016 |
Applicable Standard: IS 302 (Part 1):2024
India's household electrical safety standard is the IS 302 series. A general part applies to every household appliance. A particular part adds requirements written for a specific appliance, and for these machines it follows IEC 60335-2-10.
Products Typically Assessed Under This Standard
Machines with a rotating pad or brush used to buff and polish floors.
Machines used to apply and spread wax or polish on floors.
Wet scrubbing machines that apply water or cleaning solution and scrub the floor surface.
Machines used by laymen in shops, hotels, offices, schools and hospitals, which the standard's scope includes.
QCO 2026 Implementation Dates
The Order applies different start dates by enterprise size, as defined under the Micro, Small and Medium Enterprises Development Act, 2006.
The Order applies to both domestic manufacturers and importers. Goods manufactured in India purely for export are outside its scope.
Mandatory Tests for Floor Treatment and Wet Scrubbing Machines
Samples are tested at a BIS-recognised laboratory against IS 302 (Part 1):2024 and the applicable particular requirements. The exact test plan depends on the edition in force and your model's construction. Testing generally falls into these groups:
Where fitted, additional checks may apply to battery-operated machines and their chargers. Marking durability and the instruction manual are reviewed alongside these tests.
Marking and User Information
- ISI Mark — the Standard Mark with the BIS licence number (CM/L number), on the machine, rating label, packaging and manual.
- Rating label — rated voltage and frequency, input power, class of protection, model or type, and manufacturer name, address and brand.
- Safety instructions — safe use on wet floors, keeping the cord clear of the rotating parts, filling and emptying the tank, cleaning with the supply disconnected, and service guidance.
- Special parts — compatibility notes where detachable cords, special plugs or replacement brushes and pads are used.
BIS Certification Process — Step by Step
The process below follows Scheme-I. Delays usually come from incomplete documents or samples that fail in the laboratory.
Confirm that your product is a floor treatment or wet scrubbing machine under the Order, identify the IS 302 parts that apply, and check which implementation date applies to your enterprise.
Group models by rating and construction. Freeze the motor, brush drive, switch, water pump or valve and power cord details before testing begins.
Compile factory, quality-control, product and authorisation documents. Foreign manufacturers also appoint an Authorised Indian Representative.
Submit the Scheme-I application with fees and supporting documents on the BIS online portal. BIS scrutinises the file and may raise queries.
A BIS officer inspects the manufacturing process, in-house testing facilities and quality system, and draws samples from your production.
Samples are tested against IS 302 (Part 1):2024 and any particular requirements. A failed test means corrective action and retesting, so pre-compliance checks save time.
BIS reviews the inspection findings and test reports. When every requirement is met, the licence is granted with a CM/L number for the certified models.
Mark every certified unit with the ISI Mark and licence number, then comply with periodic surveillance, marking fees and renewal.
Indian Manufacturers vs Foreign Manufacturers (FMCS)
The standard and the tests are the same for everyone. What differs is how the licence is applied for, how the factory is inspected, and who holds accountability in India.
| Business | Typical BIS Responsibility |
|---|---|
| Indian manufacturer | Apply for the Scheme-I BIS licence covering each certified model |
| Foreign manufacturer | Apply through the FMCS route and appoint an Authorised Indian Representative |
| Importer | Verify that the overseas supplier holds a valid BIS licence covering the exact model being imported |
| Brand owner using a contract manufacturer | Ensure the factory holds the licence for the certified models and that brand authorisation is in order |
| Export-only manufacturer | Check that the goods fall within the Order's export exemption before relying on it |
- Licence is held by the Indian manufacturer
- BIS inspects the factory in India
- Samples tested at a BIS-recognised laboratory
- Shorter overall timeline
- Small and micro enterprises get later start dates
- Licence is held by the foreign manufacturer
- An Authorised Indian Representative is appointed
- BIS inspects the overseas factory
- Longer timeline because of inspection scheduling
- Importers must buy from BIS-licensed manufacturers
Documents Required
Missing or inconsistent documents are the most common reason applications stall. Prepare the following before filing:
- Business documents — company registration or Udyam certificate, GST registration, and proof of the manufacturing premises.
- Authorised signatory — board resolution or authorisation letter with identity proof. Foreign manufacturers also submit the Authorised Indian Representative appointment.
- Factory details — layout plan, manufacturing process flow chart, and list of plant, machinery and production equipment.
- Testing and quality control — list of in-house test equipment with calibration certificates, and the quality-control plan covering incoming, in-process and final checks.
- Product documents — model list, ratings, circuit diagram, bill of materials and critical component list.
- Brand and packaging — trademark proof and packaging artwork showing ISI Mark placement.
- Samples and test request — samples and the test request to a BIS-recognised laboratory.
- Declarations and undertakings — BIS-format declarations signed by the authorised signatory.
Timeline and Cost Factors
The figures below are indicative. Your actual timeline depends on document readiness, the number of models, laboratory availability and inspection scheduling.
| Stage | Indian Manufacturer | Foreign Manufacturer (FMCS) |
|---|---|---|
| Documents and application filing | 1–2 weeks | 2–3 weeks |
| Factory inspection and sample drawing | 2–4 weeks | 6–10 weeks |
| Laboratory testing and report | 3–6 weeks | 4–8 weeks |
| Review and licence grant | 1–2 weeks | 2–4 weeks |
| Indicative total | 45–90 days | 4–6 months |
| Cost Component | What Drives It |
|---|---|
| BIS application and licence fees | Scheme, number of models and product groups |
| Laboratory testing charges | Number of models, power rating and construction |
| Factory inspection charges | Location of the factory, number of visits, auditor travel and stay |
| Annual licence and marking fee | Production or sales volume of certified products |
| Foreign factory inspection (FMCS) | Overseas inspection logistics and travel |
| Internal QA set-up | In-house test equipment, calibration and routine test procedures |
Exemptions and Relaxations
The Order includes several carve-outs. Use them only after confirming that your situation fits the wording precisely.
The Order does not apply to goods manufactured domestically for export. Products sold in India remain fully covered.
Manufacturers of household appliances may import up to 200 units a year for research and development. These units cannot be sold, may be disposed of as scrap, and must be recorded year-wise.
A manufacturer who is BIS-certified or has applied for certification may sell declared stock for up to six months from the implementation date, subject to a declaration to BIS.
Small enterprises comply from 1 January 2027 and micro enterprises from 1 April 2027.
Post-Certification Obligations
- Use the ISI Mark exactly as licensed — on the product, rating label, packaging and manual.
- Keep routine tests and records — earthing continuity, high-voltage and insulation checks, functional checks and marking verification, with instruments calibrated on schedule.
- Inform BIS before changes — any critical component change or design revision needs prior intimation, and new models may need to be added to the licence.
- Support surveillance — market sample testing and factory audits.
- Renew on time — licences are granted for a fixed validity and must be renewed before they lapse.
Common Non-Conformities for Floor Treatment and Wet Scrubbing Machines
Water or cleaning solution reaches the motor, switch or wiring. Improve sealing and the separation of electrical parts from the wet zone.
Windings exceed temperature limits when the brush stalls or the machine is overloaded. Review motor rating and thermal protection.
Brushes or pads can be reached or catch the cord. Improve guarding and cord routing.
Creepage or clearance is too small near the motor, switch and terminals. Redesign spacing and use suitable insulating materials.
The cord pulls out or the cord reel fails under test. Upgrade anchorage and run pull and flexing tests on every unit.
Missing circuit diagrams, critical component lists or calibration certificates delay the application and factory inspection.
Penalty for Selling Without the ISI Mark
Once the Order applies to you, floor treatment and wet scrubbing machines without a valid BIS licence and ISI Mark cannot be lawfully placed on the Indian market. Contravention is punishable under the Bureau of Indian Standards Act, 2016. Consequences can include fines, imprisonment and seizure of non-conforming goods. Imported consignments without a valid licence and marking also risk being held at customs.
Benefits of BIS Certification
BIS Certification Services in India
Explore Rego Services' full range of BIS ISI Mark, FMCS and CRS certification support for manufacturers, importers and foreign brands.
BIS Certification for Dishwashers in India
Another household appliance covered by the same QCO 2026. See the certification process for dishwashers.
How Rego Services Supports Your Certification
Rego Services Private Limited manages BIS certification for floor treatment and wet scrubbing machines and other household electrical appliances, from the first applicability check to the granted licence.
- Applicability and dates — We confirm your product's entry in the QCO, the standard editions in force and the date that applies to your enterprise.
- Gap analysis — We review your design, critical components and existing test reports against IS 302 (Part 1):2024.
- Documentation — We prepare the complete Scheme-I application file, including factory and quality-control documents.
- Testing coordination — We arrange sample submission and testing at BIS-recognised laboratories.
- Inspection support — We prepare your team and facility for the BIS factory inspection, in India or overseas.
- ISI Mark and FMCS management — We handle the process end to end, including Authorised Indian Representative services for foreign manufacturers.
Frequently Asked Questions
Is BIS certification mandatory for floor treatment and wet scrubbing machines in India?
Yes. Floor treatment and wet scrubbing machines are covered by the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 (S.O. 1739(E), dated 6 April 2026). They must conform to IS 302 (Part 1):2024 and the applicable particular requirements, and bear the ISI Mark under a BIS licence. Confirm the exact serial-number entry for your model with BIS or the latest official notification.
From which date is BIS certification compulsory for floor treatment and wet scrubbing machines?
1 October 2026 for large and medium enterprises, 1 January 2027 for small enterprises, and 1 April 2027 for micro enterprises, as defined under the MSMED Act, 2006.
Which Indian Standard applies to floor treatment and wet scrubbing machines?
IS 302 (Part 1):2024, harmonised with IEC 60335-1, sets the general safety requirements named in the Order. The particular requirements follow IEC 60335-2-10 for floor treatment machines and wet scrubbing machines. Confirm the Indian standard number and edition with BIS or your laboratory.
Which machines count as floor treatment and wet scrubbing machines?
Floor treatment machines include floor buffers, polishers and waxers. Wet scrubbing machines include floor scrubbers. Vacuum cleaners and water suction cleaning appliances, floor sanding machines and floor treatment machines for commercial use fall under separate standards.
Do commercial floor scrubbers need BIS certification?
The international particular standard covers household and similar use, including use by laymen in shops, hotels, offices, schools and hospitals, but excludes floor treatment machines for commercial use, which have their own standards. Confirm the entry and standard for your model before filing.
Do imported floor scrubbing machines need BIS certification?
Yes. Imported machines must come from a manufacturer holding a BIS licence under the Foreign Manufacturers Certification Scheme (FMCS), which includes an Authorised Indian Representative and an overseas factory inspection.
How long does BIS certification for floor scrubbing machines take?
Indicatively, 45 to 90 days for Indian manufacturers and 4 to 6 months for foreign manufacturers. The timeline depends on documentation, laboratory slots, the number of models and factory inspection scheduling.
What happens if these machines are sold without the ISI Mark?
Non-compliance is punishable under the Bureau of Indian Standards Act, 2016. This can lead to fines, imprisonment and seizure of non-conforming goods.
✓ Key Takeaways
- BIS certification is mandatory for floor treatment and wet scrubbing machines under the QCO 2026 (S.O. 1739(E), 6 April 2026)
- Verify the exact Sl. No. entry, and whether commercial floor machines are covered separately, against the official Gazette notification
- Dates: 1 October 2026 (large and medium), 1 January 2027 (small), 1 April 2027 (micro)
- Standard: IS 302 (Part 1):2024, harmonised with IEC 60335-1, with particular requirements aligned with IEC 60335-2-10
- Certification route: Scheme-I ISI Mark licence; foreign manufacturers apply through FMCS
- The 19 March 2026 date quoted in older articles belongs to the superseded 2025 Order
- Export-only manufacturing is exempt; declared pre-implementation stock can be sold for six months if you are certified or have applied
- Rego Services provides end-to-end support — applicability checks, gap analysis, testing coordination and licence management
Reviewed by the Rego Services Compliance Team | Last Updated: October 2026 | Applicable QCO: S.O. 1739(E), dated 6 April 2026 | Applicable Standard: IS 302 (Part 1):2024
Your Next Step
The first implementation date, 1 October 2026, has already passed for large and medium enterprises, and small and micro enterprises are close behind. Testing slots, factory inspections and document preparation all take time. An early application can also protect existing stock under the Order's clearance provision.
Rego Services' regulatory team can confirm your applicability, prepare a complete application and manage your BIS licence from filing to grant. Contact Rego Services today for expert guidance on BIS certification for floor treatment and wet scrubbing machines and the ISI Mark process.