Appliances for heating liquids — including electric kettles, coffee-makers, egg boilers, milk heaters, rice cookers, slow cookers and similar appliances — manufactured, imported, or sold in India require mandatory BIS ISI Mark certification under IS 302 (Part 1):2024 together with IS 302 (Part 2/Sec 15):2009, notified within the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025. Compliance becomes mandatory from 19 March 2026, subject to any MSME extensions. The standard addresses protection against electric shock, power input and heating behaviour, moisture resistance given the appliance's exposure to liquids, leakage current and electric strength, and general construction and marking. Products used in corrosive or explosive atmospheres, high-frequency heating appliances, and pressure sterilizers fall outside this scope, and closely related products like electric kettles and jugs, instantaneous water heaters, and immersion water heaters are separately regulated under their own Indian Standards. Applications are submitted through the BIS ManakOnline portal, and foreign manufacturers obtain certification under the FMCS scheme via an appointed Authorized Indian Representative (AIR); imports without a valid licence can be stopped at customs.
Electric appliances for heating liquids — commonly sold as electric kettles, coffee-makers, egg boilers, feeding-bottle heaters, milk heaters, rice cookers, slow cookers and steam cookers — are among the most widely used small appliances in Indian homes, offices, hotels, and canteens. Because these appliances combine exposed heating elements, thermal cut-outs, and repeated contact with liquids, they carry real risks of electric shock, overheating, and fire if they are not built to recognised safety standards.
To address this, the Government of India brought appliances for heating liquids under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025, against IS 302 (Part 1):2024 and IS 302 (Part 2/Sec 15):2009. This guide covers what that means in practice — the applicable standards, testing requirements, the certification process, documents, cost, timeline, and what happens if a business doesn't comply.
📑 Quick Navigation
- What Is BIS Certification for Appliances for Heating Liquids?
- Is BIS Certification Mandatory?
- What Do IS 302 (Part 1) and Part 2/Sec 15:2009 Cover?
- What's Excluded From This Standard?
- What Does BIS Testing Check?
- Certification Process
- Document Checklist
- Indian & Foreign Manufacturers, and Importers
- Certification Cost
- How Long Does Certification Take?
- Consequences of Non-Compliance
- How Rego Services Supports Your Certification
- Frequently Asked Questions
What Is BIS Certification for Appliances for Heating Liquids?
BIS certification demonstrates that an appliance for heating liquids conforms to the applicable Indian Standard requirements set out by the Bureau of Indian Standards before it is sold or imported in India. Because these appliances repeatedly hold or heat liquid close to the user, the certification framework looks closely at the elements that keep the appliance electrically safe under moist, hot operating conditions, in addition to general build quality. It considers characteristics such as:
Insulation, earthing, and enclosure design that keep live parts safe to touch in normal use.
Behaviour of the heating element, power input and current, and thermal cut-out performance under rated conditions.
Resistance to moisture ingress, leakage current, and electric strength given the appliance's direct exposure to liquids.
Classification, marking, terminals, screws, connections, and overall mechanical construction.
This makes BIS compliance particularly relevant for businesses that manufacture or source electric kettles, coffee-makers, egg boilers, milk heaters, or similar appliances for commercial sale or import in India — and compliance needs to be considered during product design and production, not only when applying for certification.
Is BIS Certification Mandatory for Appliances for Heating Liquids in India?
Yes. Appliances for heating liquids are specifically listed under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025, against IS 302 (Part 1):2024 and IS 302 (Part 2/Sec 15):2009. Compliance becomes mandatory from 19 March 2026, subject to any timeline relaxations BIS notifies for MSMEs. Certification is granted under Scheme-I of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018, the same product certification scheme used for the wider household-appliances QCO.
The ISI mark licence for appliances for heating liquids is granted only when the product meets the benchmarks of electrical safety and reliable performance specified under the applicable standards, and imports without a valid BIS licence and ISI mark can be stopped at customs.
What Do IS 302 (Part 1) and Part 2/Sec 15:2009 Cover?
IS 302 (Part 1):2024 — Household and Similar Electrical Appliances, Safety, Part 1: General Requirements — is identical under dual numbering with IEC 60335-1:2020, and sets out the general safety requirements applicable across household and similar electrical appliances, including classification, marking, power input, heating, leakage current, insulation resistance, mechanical strength, and construction.
IS 302 (Part 2/Sec 15):2009 — Particular Requirements, Section 15: Appliances for Heating Liquids (First Revision) — builds on Part 1 with requirements specific to appliances rated up to 250 V that heat liquids, covering examples such as electric kettles and other appliances for boiling water with a rated capacity not exceeding 10 litres, coffee-makers, cooking pans, egg boilers, feeding-bottle heaters, milk heaters, and pressure cookers with a rated cooking pressure not exceeding 140 kPa and a rated capacity not exceeding 10 litres.
What's Excluded From This Standard?
Not every liquid-heating product falls within the scope of IS 302 (Part 2/Sec 15):2009, so classification matters before applying for certification.
| Product Type | Applicable Standard / Status |
|---|---|
| Electric kettles, coffee-makers, egg boilers, milk heaters, rice/slow/steam cookers (rated ≤ 250 V) | IS 302 (Part 1) & Part 2/Sec 15:2009 |
| Appliances intended for locations with a corrosive or explosive atmosphere | Outside the scope of Part 2/Sec 15 |
| Appliances for high-frequency heating | Outside the scope of Part 2/Sec 15 |
| Pressure sterilizers | Outside the scope of Part 2/Sec 15 |
| Electric kettles and jugs (product specification) | Separately covered under IS 367 |
| Electric instantaneous water heaters | Separately covered under IS 302 (Part 2/Sec 35):2017 |
| Electric immersion water heaters | Separately covered under IS 302 (Part 2/Sec 201):2008 |
A manufacturer producing more than one type of liquid-heating or water-heating appliance should evaluate each design separately rather than assuming that certification under one standard covers a different product category.
What Does BIS Testing Check for Appliances for Heating Liquids?
BIS testing for appliances for heating liquids is designed to check whether the appliance meets applicable requirements for electrical safety, construction, and durability under conditions of repeated exposure to hot liquids. The basic testing requirements include:
Checks that the appliance is correctly classified and marked in accordance with Part 1 and Part 2/Sec 15.
Checks that live parts and accessible surfaces protect users against electric shock during normal use.
Checks the starting behaviour of appliances that use a motor, such as certain soy milk makers and blending-type heaters.
Checks that the appliance's power input and current draw stay within rated limits under normal operation.
Checks the temperature rise of the heating element, handle, and surrounding parts during a full heating cycle.
Checks leakage current and electric strength both at room temperature and at operating temperature.
Checks resistance to transient overvoltages and to moisture given the appliance's direct exposure to liquids.
Checks overload protection of transformers and associated circuits, and the appliance's endurance over repeated use.
Manufacturers should review both standards against the actual heating element, thermal cut-out, capacity, and body construction of the appliance before submitting samples for testing — changes in components, wiring, or rated capacity can affect compliance.
What Is the BIS Certification Process for Appliances for Heating Liquids?
Check that the product is an appliance for heating liquids within the scope of IS 302 (Part 2/Sec 15):2009, and not an excluded chemical, high-frequency, or hazardous-location device.
Check the appliance's heating element, thermal cut-out, insulation, earthing, and marking against Part 1 and Part 2/Sec 15 requirements.
Prepare the technical and business documents required for the BIS application and product evaluation.
Submit the application through the BIS ManakOnline portal along with the required information and supporting documents.
Required samples are submitted to a BIS-recognised laboratory for testing against the applicable clauses of Part 1 and Part 2/Sec 15.
BIS assesses the manufacturing facility, production controls, testing arrangements, and quality-control systems.
Once the applicable requirements are satisfactorily completed, BIS grants the licence, allowing the Standard Mark to be applied to the approved product scope; foreign manufacturers receive it under the FMCS scheme via an appointed AIR.
What Are the Documents Required for BIS Certification?
The exact document list can vary by manufacturer and product, but businesses should generally prepare:
- Legal address proof of the factory — Confirming the manufacturing facility's registered location.
- Product specifications — Technical details, circuit or wiring drawings, and thermal cut-out specification of the specific model.
- Raw material, component, and testing equipment details — Documentation of what the facility uses in production and testing, including calibration certificates.
- QC staff and basic factory details — Information about quality-control personnel and facility operations.
- Lab test reports — Product testing results demonstrating conformance to IS 302 (Part 1) and Part 2/Sec 15:2009.
- Main Application Form V — The formal BIS application document.
- ISI application fee — The prescribed fee accompanying the application.
- Authorized Indian Representative appointment — Required for foreign manufacturers submitting an application.
Understanding BIS Certification for Indian and Foreign Manufacturers
Certification requirements should be considered differently depending on where the appliances for heating liquids are manufactured:
- The manufacturing unit must be located in India to apply for the domestic ISI certification route
- Maintain in-house testing facilities and a quality-control system for raw materials and finished products
- Follow the applicable BIS FMCS certification route for overseas manufacturing
- Meet requirements concerning the manufacturing location and quality systems
- Appoint an Authorized Indian Representative (AIR)
What Is the BIS Certification Cost for Appliances for Heating Liquids?
There is no single fixed cost representing the complete price of BIS certification. A simplified breakdown of the general estimate:
| Component | Domestic Manufacturers | Foreign Manufacturers |
|---|---|---|
| Application Fee | ₹1,000 | ₹1,000 (Equivalent USD) |
| Sample Testing | As per applicable clauses of IS 302 (Part 1 & Part 2/Sec 15) | As per applicable clauses of IS 302 (Part 1 & Part 2/Sec 15) |
| Audit Fee | ₹7,000 per man-day | ₹7,000 per man-day |
| Minimum Marking Fee | Depends on product & IS | Depends on product & IS |
| License Fee | ₹1,000 | ₹1,000 (Equivalent USD) |
| Visiting Fee | Not applicable | As actual (airfare, visa, stay, etc.) |
| Additional Charges | May vary | May vary |
| Consultancy Fee | Varies | Varies |
How Long Does BIS Certification Take?
The timeline generally depends on the manufacturer's readiness and the product's complexity. On average, it takes around 30 working days for domestic manufacturers and considerably longer for foreign manufacturers applying under the FMCS route, at BIS's technical discretion.
Completeness of documents and laboratory availability.
Sample readiness and overall product conformity.
Factory readiness and audit scheduling.
Testing results, queries or non-conformities, and any corrective action.
With the QCO's compliance deadline set at 19 March 2026, manufacturers and importers should begin the BIS process well ahead of commercial production or import planning, and should keep track of any MSME extensions or amendments notified for this QCO.
What Happens in Case of Non-Compliance with BIS Regulations?
Non-compliance with applicable BIS requirements can create serious regulatory and commercial consequences for manufacturers, importers, and sellers. If a notified product doesn't conform to the applicable Indian Standard, or is sold or imported without the required certification, the business may face action under the applicable BIS regulatory framework:
Non-compliant products may not be permitted to be manufactured, imported, stored, or sold where mandatory BIS requirements apply.
Appliances for heating liquids imported without a valid BIS licence and ISI mark can be stopped at customs.
Violations of the BIS Act and related requirements can attract fines, penalties, and other enforcement measures.
Regulatory authorities may take action against products found to be non-compliant in the market.
Manufacturers may need to modify the product, repeat testing, or undergo additional compliance procedures.
Where a licence has been granted but the certified product or manufacturing controls fail to meet requirements, BIS may take action under the applicable certification framework.
Maintaining conformity after certification is equally important — compliance isn't limited to obtaining the BIS licence once; the certified product must continue to meet applicable requirements and marking conditions to remain eligible for sale in India.
BIS Certification for Household Electrical Appliances — Complete QCO 2025 Guide
Manufacturing or importing other household electrical appliances alongside kettles or milk heaters? See our complete guide to the wider Household, Commercial and Similar Electrical Appliances QCO, covering applicable IS 302 categories and the certification process.
How Rego Services Supports Your BIS Certification
BIS certification requires coordination between regulatory requirements, product specifications, testing, and manufacturing controls. Rego Services Private Limited supports manufacturers, importers, and businesses with the BIS certification process for appliances for heating liquids, including:
- Applicability assessment — We confirm your product falls within the notified scope and identify the correct combination of IS 302 (Part 1) and Part 2/Sec 15 clauses that apply.
- Documentation support — We prepare the complete document set, including Form V, product specifications, and QC details.
- Testing coordination — We manage sample submission and testing with BIS-accredited laboratories.
- Certification assistance — We guide you through the factory audit and the full certification process, including submission through the BIS ManakOnline portal.
- AIR support for foreign manufacturers — We can act as your Authorized Indian Representative and manage the FMCS application end-to-end.
- Cost-effective, tailored compliance consultancy — We provide guidance suited to your specific product range and manufacturing setup.
Frequently Asked Questions
Is BIS certification mandatory for appliances that heat liquids?
Yes. Appliances for heating liquids are notified under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025, and mandatory compliance applies from 19 March 2026, subject to any MSME timeline extensions notified by BIS.
Which BIS standard applies to appliances for heating liquids?
These appliances are evaluated against IS 302 (Part 1):2024, the general safety requirements for household and similar electrical appliances, read together with IS 302 (Part 2/Sec 15):2009, the particular requirements for appliances for heating liquids.
Which products fall under IS 302 (Part 2/Sec 15):2009?
The standard covers appliances rated up to 250 V used to heat liquids, such as electric kettles, coffee-makers, cooking pans, egg boilers, feeding-bottle heaters, milk heaters, pressure cookers up to 10 litres, rice cookers, slow cookers, steam cookers, soy milk makers and tea makers.
What's excluded from this standard?
Appliances intended for locations with a corrosive or explosive atmosphere, appliances for high-frequency heating, and pressure sterilizers fall outside the scope of IS 302 (Part 2/Sec 15):2009, and closely related products such as electric kettles and jugs, instantaneous water heaters, and immersion water heaters are separately regulated under their own Indian Standards.
Can foreign manufacturers sell these appliances in India without BIS certification?
No. Imports of appliances for heating liquids without a valid BIS licence and ISI mark can be stopped at customs. Foreign manufacturers obtain certification under the FMCS scheme through an appointed Authorized Indian Representative.
How much does BIS certification for appliances for heating liquids cost?
There is no single fixed cost — it depends on laboratory testing charges for the applicable clauses of IS 302 (Part 1) and Part 2/Sec 15, the number of models, and factory preparation, alongside standard application, audit, marking, and licence fees.
✓ Key Takeaways
- Appliances for heating liquids require mandatory BIS ISI Mark certification under IS 302 (Part 1) & Part 2/Sec 15:2009, notified within the Household, Commercial and Similar Electrical Appliances QCO, 2025
- Compliance is mandatory from 19 March 2026, subject to any MSME extensions
- Testing covers electric shock protection, power input/heating behaviour, moisture resistance, leakage current/electric strength, and construction/marking
- Corrosive/explosive-atmosphere, high-frequency heating, and pressure sterilizer products are excluded; electric kettles and jugs, instantaneous water heaters, and immersion water heaters follow their own separate standards
- Applications are submitted through the BIS ManakOnline portal, with the licence granted for the approved scope
- Imports without a valid BIS/ISI mark can be stopped at customs
- Rego Services provides end-to-end support — applicability assessment, documentation, testing coordination, and AIR services
Conclusion
BIS certification for appliances for heating liquids is an important regulatory requirement for businesses notified under the Household, Commercial and Similar Electrical Appliances QCO, 2025. The applicable standards, IS 302 (Part 1):2024 and IS 302 (Part 2/Sec 15):2009, cover electric shock protection, heating and power input behaviour, moisture resistance, and leakage current — and manufacturers should confirm their product's exact scope before testing begins, particularly where the design overlaps with kettles, jugs, or water heaters regulated under separate standards.
Businesses planning to manufacture, import, or sell kettles, coffee-makers, egg boilers, or similar liquid-heating appliances in India should verify the latest BIS requirements, identify the correct product classification, and prepare for testing and certification well ahead of the 19 March 2026 compliance deadline.
Contact Rego Services today to start a hassle-free BIS certification journey for your appliances for heating liquids.